Urethane Injection for the purpose of water stoppage is effective at floors, walls, and as positive side grouting of elevator pits. The concrete surface is drilled and mechanical packards are inserted. A plural component pump is used to inject urethane grout through the packards. Packards are then removed and holes sealed with a hydraulic cement, thus creating a barrier against water intrusion.

Consel, Inc. personnel are trained in handling these specialized products. The products and procedures are both environmentally safe.

Epoxy Injection is a process which chemically welds concrete utilizing a two part epoxy system. This procedure restores the structural integrity of concrete.

Epoxy injection is successful in the repair of concrete tie beams, slabs, columns, concrete areas of bridges and tunnels as well as swimming pool tanks. This process is achieved by hydro boring the crack on center, at given intervals. Placing the injection ports and sealing the surrounding areas with epoxy gel. Epoxy resin is injected, under pressure, into the ports, thus filling/sealing this crack. Once injection is completed, the exposed portion of the port is removed and a seal coat of epoxy gel is applied. Upon completion, these areas may be coated by stucco, marsite, paint, or other cementitious maters, as needed.